How the siding calculator works
The calculator uses exposed face width, not nominal board width, to determine the square feet covered by one stock piece.
It is suited to uniform boards or panels. Gable cuts, staggered joints, corners and trim require a wall-by-wall layout.
Formula used for siding calculator
The calculator keeps the measured quantity separate from any purchase rounding or allowance.
- Coverage per piece
exposed width ÷ 12 × stock length - Adjusted wall area
net wall area × (1 + cuts allowance) - Pieces
adjusted area ÷ piece coverage, rounded up
Planning choices for siding calculator
| Situation | Use | Why it matters |
|---|---|---|
| Uniform lap siding | Use exposed width | Overlap is already removed |
| Panels sold by coverage | Use package or panel area | More direct than board count |
| Gable end | Lay out courses | Short top courses change offcut reuse |
These are measurement and ordering choices, not structural specifications or code requirements.
Measure and order siding
Calculate net wall area after openings, then add returns or covered soffit areas separately.
Use the manufacturer’s stated exposure and installation details. Nominal width can materially overstate coverage.
Siding Calculator questions
What width should I enter?
Enter the installed exposed width, not the full or nominal width hidden by lap.
Are corners and trim included?
No. They are separate linear or piece counts.
Can I combine every wall?
For a first estimate, yes. A wall-by-wall layout is better where stock-length offcuts cannot transfer efficiently.
Variables and units
For the default “Surface area” mode. Other modes label their own fields in the calculator.
area- Area to cover: ft², yd², m².
boardWidth- Actual exposed width: in.
boardLength- Stock length: ft.
gap- Uncovered gap (zero for lapped siding): in; optional.
waste- Cuts and rejects allowance: %; optional.
Worked example: 600 ft² with 7 in exposure
Net wall area is 600 ft², each piece is 12 ft long with 7 in exposed coverage, and cuts add 10%.
| Field | Value |
|---|---|
| Area to cover | 600 ft² |
| Actual exposed width | 7 in |
| Stock length | 12 ft |
| Uncovered gap (zero for lapped siding) | 0 in |
| Cuts and rejects allowance | 10 % |
| Result | Value |
|---|---|
| pieces to buy | 95 pieces |
| Area including allowance | 660 ft² |
These figures are generated by the same calculation the calculator above uses, so they update automatically if the method changes.
Where these numbers come from
This calculator uses geometry and values shown in the form. Editable product dimensions, coverage figures, prices and allowances are inputs, not universal recommendations; confirm them against the product label, drawing or supplier quote.
Last updated:
Published by Material Totals. Review the calculation methodology and source registry.
Suggested citation: Material Totals, “Siding Calculator,” https://materialtotals.com/siding-calculator/
Related calculators
- Paint CalculatorEstimate paint for room walls, one wall, a ceiling or known area using coats and product coverage.
- Insulation CalculatorEstimate insulation batts from net wall area, batt dimensions, openings and a cut allowance.
- Roofing Shingle CalculatorEstimate sloped roof area, roofing squares and bundles from footprint, pitch and product coverage.
- Square Footage CalculatorCalculate rectangle, circle or triangle area, or convert a known area into square feet.